Showing posts with label plumber in California. Show all posts
Showing posts with label plumber in California. Show all posts

Wednesday, February 6, 2013

Detecting Underground Leaks in Ontario

Did you know even a tiny leak can waste 250,000 gallons of water in only three months and add over $200 to your water bill? Leaks don't just occur at your facuets and toilets, either; underground leaks can quickly become one of the costliest problems, creating thousands of dollars in property damage if undetected. There are plenty of professional plumbers operating in Ontario, California who can fix the problem, although many use old-fashioned leak detection methods that take more time and cost you more money. It's important to work with a plumber like Inland Empire Plumbing who uses modern electronic techniques for quick detection and fast repairs.

Leaks in your underground plumbing can be caused by many things, including stray electric currents from utilities that cause premature rust on piping, driving over the pipes with heavy equipment, poor installation, freezing and thawing, leaking joints and simple rust from aging pipes.

Leak Repair Courtesy of Ben+Sam at Flickr

Signs You Have an Underground Leak


  • Water pooling on the lawn or wet spots in landscaped areas of your yard
  • A single spot that's greener, mossier, softer or moldier than the rest of the lawn
  • A noticeable drop in your water pressure
  • Sudden issues with rusty or dirty water
  • An irrigated area suddenly turning brown or dying
  • Cracked pavement
  • Sink holes
  • A structure on your property is leaning
  • Sudden spike in water use or water bills that are climbing steadily for no reason

Checking for an Underground Leak


Unfortunately, most people don't realize they have a leak until they see their water bill climbing for no reason. You may realize there's a leak in your water line if you have copper pipes as well, as copper is a very good conductor of sound and the faucets in your home act as small amplifiers.

Start by checking all of the valves in your house to ensure nothing is running, even a small trickle. Check the toilets and hose faucets in particular as many toilets run without any notice. Turn the toilets off at the supply stop and, if you notice this stops the problem, you'll simply need to contact a plumber in Ontario, California to tune up your plumbing system.

Finally, inspect your entire home for any signs of water damage, including under sinks, your water heater and dishwasher. Pay careful attention to the floors, walls and ceilings as well to spot moisture. If none of these steps turned up a problem, it's time to contact a leak detection professional.

How the Leak is Isolated


If you want, try to isolate the leak before the plumber arrives to fix the problem. Start by turning off your main water cut-off valve, which may be neaer your water heater or outside of the house. This shuts off all water to your home. Test it by opening a faucet to remove the pressure and drain it until the water stops flowing. Now listen carefully. If you don't hear any water running, the leak is probably under the floors of the house.

If you still hear water running, it's probably a leak in the water main which runs under the ground between your main water cut-off valve and the water meter. Walk along the ground where you believe the water lines run and look for wet areas in the ground or even a spot where you see water bubbling up.

Contact Inland Empire Plumbing Today


At Inland Empire Plumbing, our licensed plumbers specialize in diagnosing and repairing underground leaks, including slab leaks. We use modern electronic detection equipment to quickly pinpoint the leak without the time-consuming and ineffective "listen, hit and miss" approach. Our extensive experience in underground leak detection can save thousands by finding and fixing the problem before it causes unnecessary damage to your property.

Contact the experienced professionals at Inland Empire Plumbing today to save water and money and avoid expensive repairs in the future!

Sunday, February 3, 2013

How to Check Household Water Pressure

Learning how to test your own household water pressure is a skill every homeowner should learn. Testing the water pressure regularly doesn't just help detect leaks; it can also find potential problems with your water system. Testing your water pressure is fairly simple and a quick preventative measure that ensures you always have even water flow and catch leaks before they lead to expensive water damage or repairs. Unfortunately, most people don't test their pressure until they notice a difference in water flow.

Here are the steps you can take to test your own household water pressure. You'll need a water pressure test gauge, which you can buy from any home supply store for a few dollars.

1. Start by finding your outside water faucet. Make sure the faucet isn't leaking, which can ruin the resuts.

2. Attach your gauge to the outside faucet and turn the water on completely. The gauge will read the pressure for the house. The pressure can range anywhere from 40 psi to 100 psi, so you'll need to check with your water department to find out what the average range should be in your neighborhood. If the reading is outside of this range, you may have an issue that needs to be addressed by a plumber. At this point, you'll need to contact a professional plumber in California.

3. Next, turn off your outside faucets and test the pressure for each floor of your home. Start by testing the pressure in your shower, the kitchen sink or anywhere with running water. You can test indoor water pressure by removing the faucet nozzle or shower head and attaching the gauge as you did before.

4. If you're getting inconsistent readings from the test, start attaching the gauge to each faucet in your home to pinpoint the problem.

If you or your plumber finds the water pressure is too high (anything over 80psi is too high for a home), they may recommend you install a pressure-reducer valve, or PRU, to reduce the pressure to an acceptable limit. Your plumbing system can also be protected against pressure surges in the future by installing a thermal expansion tank, which gives hot water from the water heater space to expand.

Even if you have a pressure regulator installed by your plumber, make sure you regularly test the water pressure as these devices can wear out over time. Usually failure is subtle and you'll notice drops in pressure when the water is being used. Some also fail to limit spikes in the water pressure over time, leading to faucets that leak mysteriously.

Contact Inland Empire Plumbing today if you find your water pressure is outside the normal range to get to the bottom of the problem and have a pressure-reducer valve or regulator installed.